| PVC Wall Panels | Gloss, matte, marble-look, wood-look, and tile patterns | 250–1,000 mm wide × 2,400–3,000 mm long; 5–10 mm thick | Very high; non-porous and suitable for wet interiors when correctly sealed | Moderate; can dent or crack under strong impact | 10–20 years indoors with correct installation | Wipe with a soft cloth and mild detergent; avoid abrasive cleaners | Bathrooms, utility rooms, kitchens, retail interiors, and budget renovations | Low |
| WPC Wall Panels | Textured wood grain, fluted profiles, slatted designs, and decorative colors | 150–200 mm wide × 2,800–3,000 mm long; 20–30 mm thick | High for indoor use; edges and joints should be protected from standing water | Moderate to high; stronger than thin PVC but may scratch | 15–25 years indoors, depending on moisture and UV exposure | Dust regularly and clean with a damp cloth; repair damaged surface coatings promptly | Feature walls, offices, hotels, living rooms, and covered commercial areas | Medium |
| MDF Decorative Panels | Painted, veneered, grooved, routed, or 3D geometric surfaces | 600–1,220 mm wide × 2,400–3,050 mm long; 6–25 mm thick | Low to moderate; moisture-resistant grades perform better but require sealed edges | Moderate; surface finish affects scratch and stain resistance | 10–20 years in dry, climate-controlled interiors | Use a dry or slightly damp cloth; prevent prolonged exposure to water | Bedrooms, offices, reception areas, restaurants, and decorative feature walls | Low to medium |
| Plywood Wall Panels | Natural layered edges, wood veneer, stained surfaces, and painted finishes | 1,220 × 2,440 mm or 1,220 × 2,500 mm; 9–18 mm thick | Moderate to high with exterior-grade adhesive and fully sealed faces and edges | High; good screw-holding strength and resistance to everyday impact | 20–40 years indoors when kept dry and maintained | Dust and wipe gently; reseal or refinish exposed wood surfaces as required | Residential interiors, offices, studios, hospitality spaces, and acoustic assemblies | Medium |
| Solid Wood Wall Panels | Natural grain, slatted wood, tongue-and-groove, and custom profiles | 90–200 mm wide × 1,800–3,000 mm long; 12–25 mm thick | Moderate; performance depends on species, coating, ventilation, and humidity control | High, but soft species may dent and finishes can scratch | 25–50 years or longer with proper environmental control | Dust regularly; clean carefully and re-oil or refinish according to the coating system | Premium residences, libraries, hotels, restaurants, and executive offices | High |
| Acoustic PET Panels | Felt-like colors, geometric shapes, baffles, and printed or routed patterns | 600–1,220 mm wide × 1,220–2,440 mm long; 9–24 mm thick | Moderate; resistant to occasional splashes but not intended for wet zones | Moderate; edges can fray or compress under heavy abuse | 10–20 years in normal indoor environments | Vacuum or brush lightly; spot-clean with a damp cloth and mild soap | Open-plan offices, classrooms, meeting rooms, studios, and home theaters | Medium |
| Mineral Fiber Panels | Fine-textured, smooth, perforated, or painted surfaces with a clean commercial look | 600 × 600 mm, 600 × 1,200 mm, or up to 1,200 × 2,400 mm; 12–25 mm thick | Moderate to high depending on the formulation; avoid prolonged saturation | Moderate; rigid surfaces can chip at corners | 15–30 years in stable interior conditions | Dust or vacuum gently; replace panels with severe water or impact damage | Ceilings, offices, healthcare facilities, schools, and acoustic wall systems | Medium |
| Fiber Cement Panels | Smooth, wood-textured, stone-look, or factory-painted architectural finishes | 900–1,220 mm wide × 2,400–3,050 mm long; 6–12 mm thick | Very high; suitable for humid areas and many exterior cladding systems when detailed correctly | High; rigid and resistant to rot, though edges require careful handling | 30–50 years or longer with suitable installation and coating maintenance | Wash periodically; inspect joints, fasteners, and coatings for weather-related wear | Exterior façades, wet-area walls, ventilated rainscreens, and high-traffic interiors | Medium to high |
| Compact Laminate Panels | Solid colors, wood patterns, stone effects, and decorative high-pressure surfaces | 600–1,860 mm wide × 2,440–5,600 mm long; 6–20 mm thick | Very high; dense construction has low water absorption when joints are detailed correctly | Very high; strong resistance to abrasion, impact, and stains | 20–40 years in commercial and institutional interiors | Clean with non-abrasive detergent; generally does not require repainting | Toilets, healthcare facilities, transport interiors, schools, and high-traffic corridors | High |
| Metal Wall Panels | Aluminum or steel surfaces with brushed, perforated, powder-coated, or metallic finishes | 300–1,500 mm wide × 1,000–6,000 mm long; 0.7–3 mm sheet thickness | High when corrosion-resistant metal and protective coatings are selected for the environment | High; resistant to impact and abrasion, although dents may be difficult to repair | 30–50 years or longer, subject to corrosion control and coating quality | Wash with mild detergent; inspect for scratches, coating failure, and galvanic corrosion | Commercial façades, elevators, airports, retail interiors, kitchens, and industrial buildings | Medium to high |
